| Author | Message | ||
     Billybob |
what is p/n of touch up paint for the frame on xb9s | ||
| 2008xb12scg |
http://www.badweatherbikers.com/buell/messages/384 2/3595.html?1280287740 | ||
| Bhmax |
My dealer had a hard time looking it up. One parts guy finally found M0300.YBD. Haven't actually used it yet, but it appears to be the silver for my 06 xb9r. | ||
| Brightbuell |
i just got mine to from the dealership. I did a test spray and it looks correct, im a little scared to do it, but i will soon. it going to take some good prep so as not to get any over spray on my white bike. Im going to wait at least a few more days to make sure I dont make any mistakes. One issue is i dont want to take my frame puck off just because its a pain. i think im going to use the puck as my starting point. I will paint from the bottom of the puck down to the bottom. if im able to see a diff from one side to the other i will paint the other side, but thats where my state inspection sticker is, i hope i can avoid it. the scuff in my paint is only below the puck. | ||
| Bhmax |
Just to clarify, the part # I listed above is for brush on paint. | ||
| Brightbuell |
Oh, i got the spray. I will post pics when i do it. i think i will go ahead and do it tomorrow. Im ready. | ||
| Andymnelson |
The spray is great stuff. I did my frame, and you can't even tell. I recommend spraying the entire side. Mask off the puck, and use the weld in front of the puck as your break point. Here's mine:  | ||
| Brightbuell |
Cool thanks. |
