| Author | Message | ||
     Redbuell1203 |
Ok I know that I can see all my inputs with the engine off(pushing both toggles). Is it possible to get the readings with the bike running? Am wanting to see what my voltages are while I am riding. How do I do this? | ||
| Rpm4x4 |
After the bike is running press toggle once | ||
| Bueller4ever |
You need a 09 cluster, the 08's didn't have that feature. | ||
| Redbuell1203 |
so i am u able to see it then. | ||
| Samg |
does the 08 cluster have a diag mode? | ||
| Boogiman1981 |
the bike will start and run in diag mode | ||
| Blk09r |
Mine will run in diag mode in neutral but it goes back to normal mode as soon as I start moving. It's an 09. | ||
| Ratbuell |
Or, do what many folks have done: http://www.americansportbike.com/shoponline/ccp0-p rodshow/16076.html | ||
| Zac4mac |
 I added a Kuryakyn LED meter to my 08. A few months later, I got an 09 IC with voltmeter and gear indicator. Z |
