G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Stuckinoregon Posted on Wednesday, July 21, 2010 - 10:10 pm:        2006 XB12X When I turn the key on with the kill switch on run, the check engine light doesn't illuminate at all -I went through the service manual's procedure to check out the system - and I am getting nothing out of the ECU that is trying to illuminate the CEL. Has anyone else had this issue? The manual says to replace the ECU at this point... which is expensive...   Froggy Posted on Wednesday, July 21, 2010 - 10:33 pm:        When you turn the kill switch on, does the fuel pump start priming?   Stuckinoregon Posted on Wednesday, July 21, 2010 - 10:44 pm:        Yes it does froggy, the bike starts fine. It idles horribly, but that is another issue. I have used ECMSpy, did I mess things up at that level? I bought a map from Xopti about a year ago.   Stuckinoregon Posted on Thursday, July 22, 2010 - 01:30 pm:        Anybody face this issue before?   Stuckinoregon Posted on Thursday, July 22, 2010 - 11:07 pm:        Anybody have an old 06 ECM laying around?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: