G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Hogluvr Posted on Monday, August 23, 2010 - 06:07 pm:        Didn't know if I should post here or in the XB section. I'm putting Mad Max back together, and noticed something. Are the fasteners that hold the rotor on supposed to have a flat washer on each side? I'm not talking about the square "washer" that goes on before the rotor, the fasteners I took off each have two flat round washers that went with them. I have an '03 manual and no mention of flat washers, look like they would interfere with the springs. My bike is an '05 so didn't know if they changed this, or if this is something the crazy PO did?? Trying to get this wheel back together, would appreciate any input...   Turbines Posted on Tuesday, August 24, 2010 - 12:57 pm:        Hogluvr, My parts book for the 05 bolt shows the screw, the thick sq. washer and (1) thin sq. washer.   Hogluvr Posted on Tuesday, August 24, 2010 - 07:41 pm:        Thanks for confirming Turbines, that's what I thought was supposed to be there. I'll toss the flat washers and put it back together the right way!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: