Author |
Message |
Lake_bueller
| Posted on Wednesday, July 22, 2009 - 03:38 pm: |
|
Okay...It's been a few years since I've done the wheel bearings. Now I can't seem to find the correct specs. I want to get them before I remove the wheels. Otherwise I'd just look at the info on the bearings Anybody? Thanks!!! Dennis |
Buell_bert
| Posted on Wednesday, July 22, 2009 - 05:48 pm: |
|
rear 1 (62205-2RS1) 2 (6205-2RS1) I cannot find the front numbers. Edit: DUH I just went out and looked at my spare rims (6204-2RS1) (Message edited by Buell_Bert on July 22, 2009) |
Bluzm2
| Posted on Wednesday, July 22, 2009 - 09:14 pm: |
|
This used to be at the top of this topic, I wonder what happened to them? |
Lake_bueller
| Posted on Thursday, July 23, 2009 - 09:04 am: |
|
Thanks James!! |
Lake_bueller
| Posted on Friday, July 31, 2009 - 12:10 pm: |
|
I should have mentioned that they are PM rims. It makes a difference... Castalloy Wheels - NSK bearings Front wheel - 2 ea 6204-2RS Rear wheel Right side - 2 ea. 6205-2RS Left side - 1 ea. 62205-2RS PM (Chrome) Wheels - NSK bearings Front wheel - 2 ea 6204-2RS Rear Wheel - 3 ea 6205-2RS |
Af226
| Posted on Friday, January 22, 2010 - 05:50 pm: |
|
I've just talked with my local bearing guy and below part #'s are available for about $90CDN as apposed to $200CDN from the dealer. My question is are these the correct #'s for a tuber cast wheel? Castalloy Wheels - NSK bearings Front wheel - 2 ea 6204-2RS Rear wheel Right side - 2 ea. 6205-2RS Left side - 1 ea. 62205-2RS Can this be confirmed..there used to be a chart?? af226 |
Buell_bert
| Posted on Saturday, January 23, 2010 - 06:12 pm: |
|
Hello there. Those numbers you have there are the same that I have. And I have replaced a few bearings. I hope that helps. Also the bearing #'s may be the same but quality can vary. Just like a lot of other parts. Good luck. |
Kalali
| Posted on Wednesday, July 28, 2010 - 03:44 pm: |
|
Are these Buell part #s? In other words, can I order the bearings from the dealer using these numbers? |
Bluzm2
| Posted on Wednesday, July 28, 2010 - 11:17 pm: |
|
No, they are bearing numbers you would use at a bearing supplier. They are cheaper there anyway. Just make sure they are good ones, NSK or the like.. Brad |