| Author |
Message |
    
Captain_america
| | Posted on Sunday, July 04, 2010 - 03:43 am: | 
|
Yeah i saw that one a while ago but at $350 buck (i think it was) Efff that! I'll stay with my stock cover modded out!
Hey Thurston, What did you use around the lip of the air box cover and at the bottom where it meets the frame/tank? That makes it look super clean!
Your and Moutain's mesh both look really good.
Time to go murc some fools on COD MW2, Sleep, then Wake up and work on the racecar 
(Message edited by Captain_america on July 04, 2010) |
Avalaugh
| | Posted on Sunday, July 04, 2010 - 07:58 am: |
|
This is what i used to line my inner box, there is the perfect amount in 1 pack 
http://cgi.ebay.co.uk/StP-speaker-Military-Grade-C ar-Sound-Deadening-Proofing-/270593634289?cmd=View Item&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=ite m3f00a32ff1
 |
Mountainstorm
| | Posted on Sunday, July 04, 2010 - 12:19 pm: |
|
Is the adhesive holding up to the heat okay? I might have to reline mine in similar material. |
Avalaugh
| | Posted on Sunday, July 04, 2010 - 12:27 pm: |
|
Bike is still not back together from the crash, waiting on the swingarm, it has been very hot the last few days and i left it in the sun, seems fine but only time will tell.
This is a quote from the advert for the product "The material is water resistant and is resistant to the influence of the environment; has corrosion-preventing and sealing properties. Operability in the moderate tropical climate in the air quality conditions at the temperature from 45 °Ñ below zero to130 °Ñ above zero.
The polymeric layer on the base of butyl rubber allows an easy mounting of the material to the vibrating surface and avoids using hazardous glues containing solvents.
The material is easily mounted to the complex surface. It does not need to be heated while being mounted; it may be assembled to dry corrosion-preventive materials.
Usage recommendations: The material can be used as the vibro-damping material for vehicles and other technical equipment that demand an efficient noise and vibration reduction." |
Sir_wadsalot
| | Posted on Wednesday, July 10, 2013 - 12:47 pm: |
|
I saw Mountain's Youtube (Cyberdruid Modgod?) vid about this and decided to pull the inner airbox. If nothing else I wanted some louder. |
|
