| Author |
Message |
    
Cyclone00
| | Posted on Monday, May 24, 2010 - 11:02 pm: | 
|
Ive got a slip on (old style) SuperTrapp muffler on my Cyclone. Today when cleaning my bike I noticed that there is a small amount of play in the back of the system around the back clamp/mount. The rear mount is as tight as it can be but its like the clamp is slightly larger then the muffler.
Ive never noticed this before, is this normal? Do I need a new clamp? This system is pretty old, probably 9 or 10 years old.
Thanks,
Eric
Eric
I |
Onehugger
| | Posted on Tuesday, June 01, 2010 - 10:21 am: |
|
Hi Eric, email SuperTrapp!
hugger@supertrapp.com and I will try to assist you!
Later, Gerry |
Maddanthony_59
| | Posted on Wednesday, June 23, 2010 - 01:14 pm: |
|
I had the same problem. The little bit of play vibrated the front clamp enough, and the muffler fell off when I started my bike at work in front of several Semi-Snooty Touring riders.
I made a Shim from a Soup Can, and put this around the pipe inside the clamp. This worked fine for a while. But eventually it vibrated loose, and the muffler fell off again. So I went to the Former Buell dealership, and got a Sportster "P" Clamp, and replaced the rear clamp with that. It won't be vibrating loose anymore! |
Cyclone00
| | Posted on Thursday, June 24, 2010 - 12:14 pm: |
|
Thanks Maddonthony. I ended up emailing Onehugger at Supertrap. He sent me out a couple of clamps at no charge. Installed them and its fixed. Great Customer service! Im impressed! |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through August 12, 2010 »
SuperTrapp Exaust question