G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   X1_rider Posted on Monday, June 07, 2010 - 09:00 am:        I am trying to tighten the bolt at the bottom of the fork into the damper assembly inside the tube but the damper assembly just keeps rotating inside the tube. I didn't have problems with the other side and I'm wondering why it's doing that. Do you guys think if I was to screw the top of the fork back on and try compressing the fork while tightening the bolt it would prevent the damper assembly from rotating inside the tube? Thanks in advance for any help with this. The bike is a 2002 X1W.   Sportyeric Posted on Monday, June 07, 2010 - 01:04 pm:        Its been a very long time since I did that task (way over-due, I guess) but as I recall, that's the way I did it. Bit of a pain to have to wrestle the cap on twice.   X1_rider Posted on Monday, June 07, 2010 - 01:18 pm:        Thanks, I'll try it that way.   X1_rider Posted on Tuesday, June 08, 2010 - 01:01 pm:        A short update, if anyone can benefit from this. I tried compressing the fork, got the bolt in a bit tighter but the damper kept rotating. I used an impact in the end, I guess the speed of rotation of the impact was too quick for the damper to follow and the bolt finally "caught", then I was able to torque it.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: