G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Rob_l Posted on Saturday, May 29, 2010 - 09:44 am:        All went fine with install runs great! But in DIAG mode its full of error codes and no ck engine light. Is this normal? The light comes on and goes off for bulb check. Thanks, Rob 09 1125R   Zac4mac Posted on Saturday, May 29, 2010 - 10:05 pm:        Ride it. After 50 "clean starts" the DTCs will clear. They don't affect any run parameters. Z   Rob_l Posted on Tuesday, June 01, 2010 - 07:27 am:        Z, Thank you! Rob   Dirty_john Posted on Wednesday, June 02, 2010 - 02:21 am:        error codes are from when Erik Buell Racing uploaded to the ECM - ignore and after 50 ignition cycles they will go historic. Before fitting the Erik Buell Racing race ecm I ran the diag mode in the IC to check that there were no codes, then fitted the race ecm, entered dig mode on the IC and logged the codes before firing her up. Then later entered diag mode and made sure there were no further error codes. This matter had come to be noted on this forum before my Erik Buell Racing race ECM was delivered so I knew what to expect. Search the forum. (Message edited by Dirty_john on June 02, 2010)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: