G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   1_mike Posted on Monday, May 17, 2010 - 10:55 am:        While finishing up my (1125)CR bar adaption to my 05 Lightning, I noticed that the main elect. harness...where it is covered/protected by a plastic cover around the steering head, is being severely bent back and forth as you turn the bars. So much so that the protective "tape" that covers the wires has chaffed to the point that the harness is showing the separate wires. How long will it take to break the wires themselves...? So now I guess I gotta go back in there and rework the way the harness runs past the steering head. Just thought I'd pass on what I saw on mine. Mike   Firebolt32 Posted on Monday, May 17, 2010 - 11:30 am:        How long will it take to break the wires themselves...? Not long if exposed.   1_mike Posted on Monday, May 17, 2010 - 12:08 pm:        Sorry that question was retorical...! Mike   Firebolt32 Posted on Monday, May 17, 2010 - 12:43 pm:        I figured so...just being a smart ass... I took some rubber hose like material, wrapped my exposed wires and then taped the hell out it. It held up fine.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: