G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   David_e Posted on Saturday, June 05, 2010 - 01:45 am:        Does anyone have an old XB clutch cable laying around that I could buy the boot from? I burnt mine on the header because I forgot to tighten the wire retainer. Thanks Guys.   Ulynut Posted on Saturday, June 05, 2010 - 08:10 am:        Find an old bicycle (or truck) inner tube, cut to fit, wrap it around twice, and zip tie it nice and tight.   Sifo Posted on Saturday, June 05, 2010 - 08:29 am:        Find an old bicycle (or truck) inner tube, cut to fit, wrap it around twice, and zip tie it nice and tight. Make sure there is a bit of slack on the bottom so moisture can drain out. I've seen the bottom water tight and the top slightly lose so water seeps in. Then the adjuster becomes a ball of rust. Of course you will get a new boot with the new cable at that point!   Ulynut Posted on Saturday, June 05, 2010 - 08:36 am:        +1 Sifo.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: