G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Mace32 Posted on Thursday, May 06, 2010 - 12:39 pm:        I have an 06 XB12scg and my front brake recently began pulsating when I engage it. Originally i thought the monster rotor needed to be replaced but that seems unlikely. I heard this could be caused by brake pads or build-up of brakedust. Any past experiences with this? If so, what should I replace, and/or how do I clean the rotor? I appreciate the help.   Hammer71 Posted on Thursday, May 06, 2010 - 01:17 pm:        I clean the rotor with fine steel wool. No issues again   Jaimec Posted on Thursday, May 06, 2010 - 01:57 pm:        Do a search. This problem has been reported (and fixed) HUNDREDS of times since I've been on this board.   Andymnelson Posted on Thursday, May 06, 2010 - 02:13 pm:        Clean the rotor to remove the deposits, then never sit at at stop with the front brake clamped, use the rear to hold instead. The deposits get "cooked" in in place when clamped at a stop. There are other brake pads that do not leave the same deposits- some like Lyndahl Golds (personally, I can't stand the feel of them), others like EBCs (my preference). Like Jaimec said, use the search function and you will get lots of info!   Hughlysses Posted on Friday, May 07, 2010 - 10:14 am:        Andy- I've always followed your suggested braking technique, and I still wound up with pulsating front brakes. I switched to Lyndal pads which seemed to improve things, but the pulsing is still there. Cleaning or a few high speed stops will improve things for a while but the pulsing always seems to come back. I just ordered a 6mm rotor from Erik Buell Racing with a mounting kit; I'm kind of debating which pads to go back with. I'm leaning towards the EBCs.   Terrys1980 Posted on Friday, May 07, 2010 - 10:51 am:        I installed EBC pads when I installed my Galfer wave rotor and so far they have been great. The pads are not as harsh on the rotor as I thought they would be.   Sloppy Posted on Friday, May 07, 2010 - 12:12 pm:        http://www.brushresearch.com/brushes.php?c1=6   Glitch Posted on Friday, May 07, 2010 - 12:58 pm:        Cleaning or a few high speed stops will improve things for a while but the pulsing always seems to come back. Sometimes a rotor is just worn out.   Mace32 Posted on Friday, May 07, 2010 - 02:13 pm:        Thanks for input everyone. I will try cleaning the rotor this weekend to see how it turns out. After that, I will take it to the next step and get some new pads.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: