| Author | Message | ||
     Saratoga |
Is there an easy way to get all four turn signals flashing at once? Is it as simple as jumping two relays together? Asking because I need to have 4-ways for an event that I'm involved with this weekend (motofef at a criterium). TIA. | ||
| Firebolt32 |
Good question...free bump! | ||
| Froggy |
The 1125's have 4 way lights, but they only come on when the BAS is tripped. | ||
| Saratoga |
Fingered it out... just jump the two blue turn signal leads together under the flyscreen. I think I'll hardwire a toggle switch in there to have them on demand. Flip the switch, hit the turn signal and then you have 4-ways. | ||
| Mikef5000 |
You'll need to add 2 diodes as well. I've added 4-ways to both my XB's. It's not difficult, but takes some fooling around with a test light. | ||
| Livers |
I'd like to use one of these: #20 ATS-03 about 3/4 down the page. Now if one of our electromechanical types would chime in with how to remove/disable the latching function on the stock switch, I'd consider this the perfect solution. | ||
| Saratoga |
Toggle switch works as advertised. One wire soldered to each blue wire for the R and L turn signals under the flyscreen going to either side of a toggle switch. Toggle switch off: R and L signals function independently with the factory turn signal switch. Toggle switch on: R and L signals flash together when you place the factory turn signal switch in either position. Mission accomplished. | ||
| Jetjock |
I splurged for a Kisan SignalMinder (SM-1). In addition to emergency flashers, it added: self canceling signals, running lights, & escort flashers (alternating left/right vs together in emergency) |
