| Author | Message | ||
     Jeepinbueller |
Just did a few mods to the bike so I have some parts floating around the garage just taking up room. Prices are loose but fair as they are I believe. I have no idea how much each will cost to ship so we will negotiate the final cost after I get the shipping figured out. Communication via Email (I check throughout the day and am prompt with responses). Payment through PayPal is preferred as of right now. All items came off my 2009 1125CR 1.) Stock tail light assembly — $30 Includes stock bulb, light housing with wiring intact, and lens. **The two screws that fasten the housing together and to the tail are not included. I had to reuse these when putting on the 2010 unit.** 2.) Stock rear fender — $50 Includes license plate light w/wires intact. If needed, I can include two of the three bolts needed to mount. The third is currently in use by my Jardine F.E. 3.) Stock 1125CR exhaust — $160 If needed, I can include the two rear bolts to mount the muffler (unused by my Barker's). Two front bolts and front-left nut is in use by me to refasten lower heat exchanger mounts. Front-right nut is intact and still installed in muffler bracket. Two collector clamps included. Approx. 1,100 miles on this (from new). No damage whatsoever. 4.) Stock throttle grip — $15 No damage, Approx. 900 miles on it. Minimal wear as I ride with leather-palmed gloves. Throttle tube obviously included. **Stock plastic bar end not included** EDIT 3/23 2:30pm: Forgot to say, if you want pictures, just ask and I'll throw them up. I might do it anyway. (Message edited by jeepinbueller on March 23, 2010) |
