| Author | Message | ||
     Jetlee |
My bro and I were fiddlin around in his garage and I mentioned the Screamin Eagle module. He pulled out a Crane Cams Hi-4 Single Fire module and coil. Has anyone tried this? I'm thinkin about rigging it in there to see what happens. | ||
| Gearheaderiko |
Yes, been tried. The SE module is reportedly a Crane unit, but I dont remember which one (its posted on badweb somewhere) and it doesnt look like the Hi4 ignition. See the introduction on the previous page (Ignition, Battery, Charging System - Electronic Trouble shooting) for a good overview on what needs to be done and resulting effects on the TPS and auto enrichener. I would also contact Crane for instructions on regular installation and if they even have instructions on a Blast installation. Having the Crane coil is a plus, but it may or may not be needed. If its a dual plug coil, the extra plug wire can be run to ground (or install a dual plug head  ) Just about any self contained 'nose cone' HD/Buell ignition will work. Ignitions with a separate external module will also work, but it just takes more wiring. I could relay more info, but I dont want it to seem more complicated than it really is! | ||
| Gearheaderiko |
See also the introduction here:http://www.badweatherbikers.com/buell/messages/201 64/253601.html?1222531363 | ||
| Jetlee |
Awesome, thank you! I was looking through the SE instructions and thinking to myself, "I bet that's what I need to do." Cool. I'll definately let you all know how it goes and what the outcome is! | ||
| Jetlee |
http://www.badweatherbikers.com/buell/messages/201 64/Blast_Tech_Note-347544.pdf Installation Step #2 is critical. I need a new cover. Picture I thought it meant dont go too deep into the metal, not too deep towards the shaft. Oops. My mistake for others to learn from. (Message edited by jet-lee on March 09, 2010) | ||
| Gearheaderiko |
Whats wrong with it? I cant tell from the picture, is it really unusable? PS thanks for posting so others can learn. Thats how Badweb works | ||
| Jetlee |
There's a little tiny hole in the middle. It squirts oil now. | ||
| Ezblast |
Fill it with some JBWeld. EZ | ||
| Jetlee |
I plan on it, hahaha. Great minds think alike! | ||
| Swampy |
Use some brake clean to get all the oil off the surface and spooge it on, JB Weld  | ||
| Jetlee |
Hahaha! That's exactly what I used to clean it to find the hole! | ||
| Jetlee |
So I just JB Welded the hole, today. I'll be gettin the correct timing cup/rotor come Monday or so. We'll go from there and see what happens. | ||
| Ezblast |
 |
