G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Dthquazi Posted on Saturday, February 20, 2010 - 04:32 am:        Search is still down. 2009 xbscg 1125 cr bars with cable routed through headlamp housing. I have gotten my bike put back together and am at the point of adjusting the clutch. At the tightest point of adjustment, I still can't get the spec range required by the manual. Anybody with this setup or better knowledge than me have any suggestions. Was rolling the bike around and it is tough to roll when in first gear with the clutch lever pulled (engaged disengaged, can't remember which). I can roll it but it takes some leg power. Bike went through a complete clutch rebuild due to a low side.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: