G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Blackm2 Posted on Tuesday, January 26, 2010 - 10:06 pm:        Any way to remove these without totally screwing the seal up? Thanks.   Blazing_saddle Posted on Wednesday, January 27, 2010 - 01:03 am:        I tried it once, ended up buying a new cluster   Dreadnaught1 Posted on Wednesday, January 27, 2010 - 12:43 pm:        Yes, open them up by unrolling the edge with a small screwdriver SLOWLY, go all the way around the rear side of gauge and the bezel will come off. It will take you about 30 mins. To put back on carefully slip on bend back over with something firm but not too hard. Then peen with plastic punch with flat end with face on a towel so not to damage face. IT CAN BE DONE. I did it with tach and speedo. You will scratch the plastic some but once together you cant see it with cups on and rubber in cluster.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: