G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Chevnut55 Posted on Monday, February 08, 2010 - 09:15 pm:        i have a xb12r,buying a buell race pipe off a xb9r ,will it work?any differences?   Chevnut55 Posted on Monday, February 08, 2010 - 09:26 pm:        i am buying a xb9r buell race pipe for my xb12r.will it work and will there be any difference?   Bishopjb1124 Posted on Monday, February 08, 2010 - 09:41 pm:        I am currently running an xb9 race pipe on my uly. After doing some research I found out that they are the same. Just make sure you do a TPS reset. If you are running a free flow air filter and the pipe with out a race ECM you may start fouling plugs. Best bet would be to get an ECMspy cable and load a race map in your bike (depending on the year). Or by a new ECM from EBR. Jimmy   Froggy Posted on Monday, February 08, 2010 - 11:43 pm:        Both race pipes are the same, 12 had a polished finish.   Chevnut55 Posted on Tuesday, February 09, 2010 - 08:36 am:        cool,thanks.   Xbrfirebolt Posted on Tuesday, February 09, 2010 - 03:28 pm:        Early XB9 Race pipes were a little shorter than the XB12 pipes. If you have the short one, you will need to clearance the right side exhaust from the race muffler to clear the belt tensioner. You'll see the interference point if you do a trial fitting. It's not a big deal to do.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: