| Author | Message | ||
     Jon960 |
To isolate the sidestand switch do I just cut the 2 black wires that go from the white plastic connector to the switch and join them together? btw its a 2001 Cyclone, I have a miss and want to start on the easy things first, its got new inlet manifold gaskets along with exhaust port gaskets. Thanks | ||
| Richsm2 |
yes,just making a jumper connection. | ||
| Kyrocket |
Before you cut them and do more damage than necessary just unplug the connector and jump the two pins. I've got a small piece of metal wedged between mine. If it turns out that that is the problem then cut and splice. | ||
| Xl1200r |
is the connector supposed to be stuffed under the oil tank? | ||
| Purpony |
like said above, unplug it and jump them together. Thats what i did when my bike didnt start. What i really did was cut the plug off the switch and soldered them together and plugged the plug back it. Worked great for a year will my bike kept dying... ended up the plug was loose within itself. Cut the plug out completely and bike has never run so good. | ||
| Rick_a |
Or you can eliminate the entire safety circuit...clutch switch, wiring, diodes, relay and all. There's a good diagram in the service manual. |
