| Author | Message | ||
     Dmac |
What has to be done to run a carb with the 2008 engine?Does anyone make a ecm that will work with this set up? | ||
| Keppi |
ecm and carb...??? all u need, change Manifold, Fuelpump and look for a Mikuni 42 single ore take two 40īs  have fun for traking use this... http://www.innovatemotorsports.com/products.php | ||
| Jdemoxb9r |
also ive seen a couple of these threads so using the search function may yield some results as well. | ||
| Dmac |
I thought that Buell changed to a crank sensor that is different from the 07 models.So you are saying the electronics will work with a carb.Forgive my ignorance I have never owned a fuel injection bike. | ||
| Nik |
No the electronics will not work with a carb. You'd have to build a dummy box to trick the ecm into thinking all the fuel sensors, injectors, pump, etc were functional. MegaJolt may also be an option. Both will require designing and building custom electronics and possibly coding. Why? Fuel injection is pretty damn awesome. | ||
| Chessm |
i was thinking of attaching a harness to the 1125 so that i can attach some horses to pull the bike. Anyone know how big it would have to be so i can use clydesdales? | ||
| Froggy |
It will be a major headache, but it could be done. Your best bet would be to rip out the entire electrical system on it, as the ECM controls just about everything on the bike. A 2007 would be easier to convert, but still would be a challenge. | ||
| Brumbear |
Carbs are nowhere near as efficient you will IMHO be wasting your time |
