| Author | Message | ||
     The4ork |
   FLYSCREEN KIT,MIDNIGHT BLACK #HM1601.1ATMW -----96 EUR HEADLIGHT ASSEMBLY, WORLD #HY0721.1ATA --------243 EUR WASHER NYLON FLAT 5/16X9/16X #HBA0509.6 -----10x0.40 EUR SCREW,SHOULDER,M6 BODYWORK T #HCA0030.1AMA -----4x3.40 EUR DIGITAL SPEEDO----- 60 EUR now the guy that posted those part numbers was from spain? do they actually work? i tried google searching them, and tried punching them into a few buell parts websites and have found nothing... id really like to find the cr headlight assembly used as its the pricey piece, been monitoring ebay and crazedlist for about two weeks now with nothing : ( anyone else make this conversion? i plan on doing two, one for the tuber and one for the blast | ||
| Ezblast |
Give me a few weeks - just ordered the manuals. I bet I could mount that puppy with Acerbis straps. EZ | ||
| Ezblast |
That is mounted on an X1 though, but still a great idea! I run my CR on high all the time double lit - that would look cool! My current set up is way less expensive though, and incorporates blinkers, though the CR mirrors could be made to work as well, again pricey vs the 3rd eye mirrors - my current Blast is very minimalist. Still I'm sure that look would be awesome on a Blast, so when the parts book comes in, if no one else posts it, I'll put up numbers and stuff - a page or two - we'll see what we are up against, and improvise! EZ | ||
| The4ork |
cool im ready to order some parts asap! | ||
| The4ork |
who was the guy making the rearsets and catch can and intake and selling them on ebay? | ||
| The4ork |
thanks to one of the guys at the old school section... take the H off the part number... FLYSCREEN KIT,MIDNIGHT BLACK P/N= HM1601.1ATMW ----- $56.80 HEADLIGHT ASSEMBLY, WORLD P/N= Y0721.1ATA --------$143.20 TOTAL $200 + tax/shipping found HERE ,just punch in the P/N's i didnt include the washer and screws... i have a boatload of screws and washers and all that other junk | ||
| Indybuell |
PM Thumpe. | ||
| Thumpe |
I'm liking the look of CR light set up. The stock blast headlight cost $136 new an the blast windscreen is the same price new. I has thinking about getting them for acouple more dollars i'm thinking CR now! Keep posting your progress on this. EZ you get the parts book an are these the right numbers? | ||
| Ezblast |
Yes - have the flu, by wed will put up numbers. EZ | ||
| Thumpe |
Hey EZ, Thanks an get better man is it swine...Dan | ||
| Ezblast |
Don't know - but all I'm riding is porcelain right now - sigh - thanks - I can get it scanned and sent latter. EZ | ||
| Ezblast |
    Looks simple enough to mount either with Acerbis straps or conventional universals. The wiring is straight forward - I just may try this on Vader. EZ | ||
| Thumpe |
Hey EZ what's the CR's part numbers for the rear blinkers thanks again...Dan | ||
| Ezblast |
LRTS - Y0526.1AM RRTS - Y0527.1AM EZ | ||
| Thumpe |
EZ do you have the repair manual for the CR if so does it have a wiring diagram for the headlight harness? Dan | ||
| Ezblast |
Black is ground, the rest explains itself, the wire charts are all fold out line charts, and would a Blast harness match a CR connector? I'm pretty sure you'll either make your own connector, or hard wire it in. Still if you want I'll scan it and post - probably tomorrow evening - no biggie EZ | ||
| Thumpe |
Cool how do the lights work on the CR are they both on with double filament bulbs with low/high beam or is the left side low beam rights high beam? Is the extra wattage going to effect the original wiring an what bulbs are in it? Dan | ||
| Thumpe |
Forget the how they work i was on the buell site checking it out seen in the pics only one was lit. What are they H4's? Dan | ||
| Thumpe |
Here's the Blast version Sweet!!   | ||
| Faseljd |
looks great Dan ! | ||
| Ezblast |
Dan - how did you mount it? EZ | ||
| Thumpe |
Your not mounting this with just a universal mount i took the stock mount bent an welded a piece of angle on the front to get the top bolts on just above the top triple clamp. The bottom mounts are just small piece of 1/2" id pipe with a tab welded on drilled an taped to the bottom triple clamp.     | ||
| Ezblast |
Nice job - looks very stock! EZ | ||
| Thumpe |
Thanks guys. |
