| Author | Message | ||
     Thatman |
I have been looking around and found some interesting reading but no real reviews on some mapping software. Tuneboy Direct Link I know you have to buy a key specific to the ecm serial number. I don't have a problem with that but which is going to give me the best bang for my buck. Will the Ecmspy every work with an 09. | ||
| Thatman |
Oops, looks like this was a redundant post. My bad, feel free to get rid of it if you like. | ||
| Buford |
Good question Thatman..come over sometime and we'll find out. Rog | ||
| Thatman |
I might be able to come out this weekend, i have my drummer installed, it's very smooth above 4k but under that i can hear more than feel like it has too much advance at lower rpm's, maybe even too lean. What kind of software are you using? I was just about to place an order for the Direct link key and cable from Al at American Sportbike. | ||
| Jraice |
I also have a drummer and agreed. Maybe not 4,000rpm but under 3,000-3,250 it makes a lot of noise but doesnt really go anywhere. Also it is pretty slow to return to idle after it gets to around 2,000 or so. If I recall that is a sign of it running a bit lean. When money is less tight, I plan to have my bike dyno'd and tuned. To impatient to do it myself, plus some local shops worked miracles with my dads 96 inch Harley motor, something like 10+ HP and TQ. |
