Author |
Message |
Froggy
| Posted on Wednesday, August 26, 2009 - 08:57 pm: |
|
Anyone have a copy of the instructions to install the Buell Zumo? I need to reference a few part numbers, usually they are on the last page. |
Ratbuell
| Posted on Wednesday, August 26, 2009 - 09:13 pm: |
|
Send me a part number for the whole kit, I can pull it off HDnet for ya. |
Ratbuell
| Posted on Wednesday, August 26, 2009 - 09:15 pm: |
|
...or not. If the kit is 92393-08Y...the instruction sheet isn't loading. Sorry. I'll keep trying. |
1313
| Posted on Wednesday, August 26, 2009 - 09:19 pm: |
|
Froggy, Very soon the H-D Zumo instructions will be headed your way. I dunno how different they are, but it's what I got when I inquired about the Buell Zumo at a Buell friendly dealer. A lot of items say 'see garmin.com' or 'not available individually'. Hope it gets you what you're looking for, 1313 |
Ratbuell
| Posted on Wednesday, August 26, 2009 - 09:26 pm: |
|
AFAIK the main differences will be the cradle-to-bike mount, and possibly the part number on the harness (length, connector type, etc). But yes...lots of the parts are direct from Garmin. I had to source my power wire (Quest II mounted to Uly) direct from Garmin, it's a long, convoluted 010-somethingorother part number style. |
Froggy
| Posted on Thursday, August 27, 2009 - 10:10 am: |
|
Yea Rat, I asked my local dealer to look it up, he couldn't pull anything up. He is good with the Buell stuff so I thought it was odd. Next I pinged Tripp @ Precision, same deal, then I got desperate and posted here. Anyway long story short, I was trying to see what kind of power cord it comes with. My 09 CR has the new fancy schmancy plug under the flyscreen, so I figured the Buell Zumo uses that plug, and I wouldn't have to hack anything up to get it to work. I took a look at the instructions Brankin sent me, looks like its the same power cord that comes with the normal Zumo, with bare wires on the end. Oh well, guess I will make my own once I dig up the connector part number again. |
Ratbuell
| Posted on Thursday, August 27, 2009 - 10:35 am: |
|
Well...if the Buell kit says it "fits" the CR, it should have a cable that plugs in, no splicing. Is the plug the same as the gray aux outlet plug on a Uly? If it is, I have the part number for that one out in the garage. Again...it's a Garmin part, but I kept the bag. I have the splice-in power lead on my S2. Garmin lists it as their "motorcycle power lead" IIRC. |
|