Author |
Message |
Drkside79
| Posted on Friday, September 11, 2009 - 01:54 pm: |
|
So one of my airbox bolts are missing does any one know what size bolt and rubber spacer to use. I am at work and i forgot to bring one with for comparison |
Drkside79
| Posted on Friday, September 11, 2009 - 03:52 pm: |
|
OK so i called both the Buell dealers around here and neither one have on. Crap |
Bromanowski
| Posted on Friday, September 11, 2009 - 04:14 pm: |
|
just go to your local hardware store and get some hex head cap machine screws in stainless. It's the same thing the factory uses. I'm not sure what size they are though. |
Andymnelson
| Posted on Friday, September 11, 2009 - 04:40 pm: |
|
99% sure they are 1/4- 20 bolts. But I personally would only use the factory ones because of the shoulder that they have to keep the airbox cover protected from too much clamping force. |
Badbueller
| Posted on Friday, September 11, 2009 - 04:45 pm: |
|
Also its nice to be able to use the torx wrench on all of them too from the toolkit. |
Froggy
| Posted on Friday, September 11, 2009 - 05:47 pm: |
|
The toolkit comes with a flathead screwdriver too, and you should have other basic tools with you too |
Reepicheep
| Posted on Friday, September 11, 2009 - 06:33 pm: |
|
+1 Andy, you will break the cover if you torque down bolts without a shoulder. |
|