Author |
Message |
Dthquazi
| Posted on Thursday, August 06, 2009 - 08:06 am: |
|
So I ended up lowsided a little bit ago. I laid it down on the primary side. After pulling the primary cover, I noticed the clutch hub had broken where the prongs hold the clutch basket on. I am wondering if I need to be worried about anything else or has my damage been somewhat limited to the clutch basket. I can take the hub and spin it freely back and forth. There is no play in the hub either back or forth. This is done without the bell on the bike. The teeth where the clutch go in do not seem to be damaged. Any suggestions. |
|