Author |
Message |
Kozy
| Posted on Saturday, August 01, 2009 - 10:58 am: |
|
Fuel pump and fuel pressure sensor similar to the 1125 models. The front & rear turn signals have changed to a new style bulb turn signal. 30mm rear wheel bearings- 3 bearings and dust seals. -One bearing on the brake side and two bearings on the sprocket side. -New tools are required to remove and install these bearings. Axle & Wheel hub changes due to the new bearings. A front O2 sensor has been added. Wire harness changes -Addition of fuel pressure sensor wire and front O2 sensor wire. -For XB12R models, the rear sub-harness is now part of the main harness, new wire for the front O2 sensor and fuel pressure sensor, fuel pump break-out location change LED tail light(JST connector) License plate light with JST connector(XB12R ONLY) Updated oil check procedure New fan strategy driven by speed and temperature Battery tender connector built into harness XB12X & XB12XT New fan shroud Right hand air scoop Cosmetic header cover |
Hughlysses
| Posted on Saturday, August 01, 2009 - 11:46 am: |
|
Thanks Kozy! I wonder what the updated oil check procedure entails? |
Nvr2old
| Posted on Sunday, August 02, 2009 - 10:11 pm: |
|
Hmmmm, me too. |
Electraglider_1997
| Posted on Sunday, August 02, 2009 - 10:50 pm: |
|
Look in swing arm with a pen lite. |
Nvr2old
| Posted on Monday, August 03, 2009 - 07:31 pm: |
|
Now that's funny.......or is it? |
Ulyscol
| Posted on Monday, August 03, 2009 - 08:20 pm: |
|
That is my preferred method. |
|