Author |
Message |
Coolcruiser
| Posted on Monday, July 06, 2009 - 07:22 am: |
|
Just bought an '02 Blast that had been sitting for a awhile. It doesn't start without a manual squirt of gas in the carb so I pulled the carb to clean the cobwebs and rejet, While it was apart I checked the fuel enricher and it functions fine (12v to a cold unit causes the needle to extend out). It seems the enrichment circuit may be plugged inside the carb. The fuel circuit is cast into the carb. There is a little plug that would need to be drilled out to allow me to probe the circuit. It would have to be replugged with epoxy or solder. Has anyone done this? TIA |
|