G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through June 03, 2009 » Installed micron exhaust bike will idle but wont run!!!

« Previous Next »

Author Message   09xblong Posted on Saturday, February 28, 2009 - 01:23 am:        cant figure out whats goin on ? bike will idle but once throttle opens dies , sometimes revs a bit then dies , unrideable. was told it would run rough at first but whats up??????   Firemanjim Posted on Saturday, February 28, 2009 - 12:10 pm:        You must have done something when installing because it should be fine, so check everything you did. You had to lower engine, did you connect plug wire incorrectly,undo FI wires, look for something like this. Just did a 9 in shop this week with Micron,ran fine,though much better after mapping.   Mesozoic Posted on Monday, May 04, 2009 - 06:17 pm:        I intalled a Serpent system on my '08 Ss and had no problems. The fit wasn't perfect and I needed to space a few things on the muffler properly, but... sounds like a major exhaust leak from your description.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: