| Author | Message | |||
     Lander_x1 |
Hi , what about install a catch can in a X1? and is easy to make a one homemade because in spain it's impossible to find one for the x1 | |||
| Limitedx1 |
try searching for catch cans. i know there are pictures floating on here somewhere, they have been made from everything from old oil cans, to baby bottles....etc. a very fancy one that bolts on can be ordered from American Sport Bike | |||
| Lander_x1 |
Ok Limited i'll take a look , thanks | |||
| Blks1l |
I made one out of an aluminium automotive air conditioner receiver/drier. | |||
| Sleez |
check this thread; http://www.badweatherbikers.com/buell/messages/476 23/440030.html?1237805294 i just made that last week, haven't installed it yet, but i think it will work well. | |||
| Preybird1 |
I got this one on a fellow badwebber recommendation http://www.pegasusautoracing.com/productdetails.as p?RecID=4703 Don't forget the little breather filter. What a deal $16.99 (Message edited by preybird1 on March 23, 2009) | |||
| Firestorm996 |
I made one out of a whisky hip-flask, with a filter attached via a hose. Cost next to nothing. | |||
| Blazin_buell |
Preybird that's a hell of a deal on a nice looking can. I went a route that I'd seen on an old Triumph flat tracker except I doubled it and used a breather for each head.   With the Pro Cure installed and this mod I never have to worry about puking anymore....unless the crank seal goes again from doing too much of this
|
