| Author | Message | ||
     Usmoto |
Mine quit working so I'm experimenting with a possible fix. I need more turn signals to modify/tinker with. I've heard there is a dealer fix for the non-working ones but electronics is what I do so I'm going to tinker. If you still have some non-working ones sitting in the trash pile or are going to the dealer to have them replaced I'd like 'em if you could get them. I really only need the circuit board inside the signal but feel free to send the whole turn signal if you like. If shipping is a concern, I can reimburse you. Paypal is easiest for me. Just let me know. | ||
| Usmoto |
I want to thank everyone who has contacted me already about the turn signals. There is a concern with the cost of shipping and rightly so. I went to the post office today and found out I can send you a prepaid envelope so your shipping cost is $0. All you have to do is put the circuit boards from the turn signals in the envelope and re-mail it back to me. Please email me your address if you are interested and I will send one of the pre-paid envelopes to you. usmoto@rocketmail.com Remember, all I need is the circuit boards that are in the rear turn signals. They are fairly easy to get out. If you can, please snip off the two terminals on the back of the boards. It will make the envelope flatter. There are pics of the circuit boards in a thread by Rah7777777: (1125R Superbike Board » Archive through October 01, 2008 » An inside look in the broken turn signals....) Once again, thanks for the response and for helping me out. |
