| Author |
Message |
    
Hooliagn
| | Posted on Sunday, February 15, 2009 - 08:00 pm: | 
|
Do It
Do It
Do It
You Can Do It
Do It |
Jjr1125
| | Posted on Monday, February 16, 2009 - 09:30 am: |
|
Here is my 1125r with rear turn signals installed on the front. I used a block off plate from DarkHorse for the base plate. I drilled a hole through the block off and the frame. There is already a hole in the fairing.
|
Heliconcr
| | Posted on Monday, February 16, 2009 - 09:37 am: |
|
Looks good. Keep up the good work fellas |
Jjr1125
| | Posted on Monday, February 16, 2009 - 09:56 am: |
|
Here is a closer look.
|
Jjr1125
| | Posted on Monday, February 16, 2009 - 09:57 am: |
|
Here is a closer look. |
Teach
| | Posted on Monday, February 16, 2009 - 11:53 am: |
|
Great work!
This really changes the look of the bike in a good way and I bet the bar end mirrors can actually let you see something other than your shoulders!! |
Marcodesade
| | Posted on Monday, February 16, 2009 - 01:33 pm: |
|
What was the price of the block off plates? |
P_squared
| | Posted on Monday, February 16, 2009 - 01:35 pm: |
|
Dark Horse Moto link: http://www.darkhorsemoto.com/html/mbop_0.html |
Jjr1125
| | Posted on Monday, February 16, 2009 - 02:28 pm: |
|
The block off plates were about $50. They are good quality and I would gladly pay that again for them. The bar end mirrors are fantastic. I could not see anything out of the stock mirrors. The bar ends are the only thing that works for a guy my size. |
