| Author | Message | ||
     Jersey_thunder |
any recall on the JT (Message edited by jerry_haughton on February 08, 2009) | ||
| Zac4mac |
Nothing I've heard of. To my knowledge, one safety campaign for 5th gear. 3 product campaigns: 1) April 08 ECM calibration - battery management 2) September 08 calibration - fuel/spark remap 3) October 08 - new sidestand spring, oil dip-stick and fuel vent re-route. All according to H-Dnet for my first week run 1125R. Z | ||
| Supertt_fl |
There's actually a 4th flash available, it doesn't show up on HDnet but it does on digital technician. and the calibration ends in 04Z | ||
| Cataract2 |
Not going to get that flash done until I know what it does and it's been confirmed to exist. | ||
| Dirty_john |
Had my 09 1125R reflashed and it cured an LFL/CEL issue | ||
| Zac4mac |
I'll have the calibration checked when Loretta gets product campaign 3 done. Would be cool if it fixes my LFL/CEL annoyance. Loretta is an early 08 with an 09 Instrument Cluster. Thanks for the insights, my current cal ends with 03Z. Z (Message edited by zac4mac on February 06, 2009) | ||
| Supertt_fl |
zac - I'm getting an 09 cluster put on today and i have the most current flash ending in 04Z. I'm thinking this flash is a slight improvement on the 03Z flash, correcting the LFL/CEL problem.. i'll let you know. | ||
| Bikejunky |
A note on that 4th Flash, It seems to not have changed anything with how my bike runs, but one thing I have noticed is that my low voltage light is not coming on anywhere near as often. Especially when the bike sits for a few days. It used to come on at start up even after sitting over night, but now it can go almost a week without kicking on. | ||
| Fresnobuell |
Loretta is an early 08 with an 09 Instrument Cluster. So Zac, was it just plug and play with the changeover to the '09? | ||
| Supertt_fl |
alright so the 09 cluster with software 6.1 was installed today and with the current 04Z flash everything seems good, no LFL/CEL problems.. no parasitic battery drain.. there is hope for the 08 1125R after all!! | ||
| Zac4mac |
Harlan - yes. Drop in, turn on, wait for 30 minutes while the ECM and IC "marry". I was riding when the display went from a countdown timer, to a real display. Z | ||
| Imonabuss |
What the heck is a spindle? | ||
| Jerry_haughton |
Jersey, what is a spindle? FB | ||
| Zac4mac |
I assumed he was referring to the steering head/triple tree pivot. Z | ||
| Jersey_thunder |
LMAO...sorry guys...i was refering to axles... my bad...i use the term at work...it does not apply to bikes...  JT | ||
| Jerry_haughton |
edited title of thread, edited intro post. FB, night janitor | ||
| Junkyrddog780 |
So if you put an 09' cluster on an 08' bike does the gear indicator work too? | ||
| Bishopjb1124 |
Yes the gear indicator works Jimmy |
