| Author | Message | ||
     Doitindark |
I saw a bellypan in roadracing world magazine for the bolt. Does anyone know where to get it, anyone have one on there bike? | ||
| Benm2 |
Try calling Buell customer support, and tell them you want to talk to Henry Duga. If Buell makes a race bellypan, he'll have it. You could also try http://www.racingmotorcycles.com | ||
| Mikej |
The bellypans were made in the past by a 3rd party supplier with low volume production. You can also go through a local dealership with a race team if you have one near you in order to get connected. Usually they want to see a race license or proof of racing intent. (enter warranty disclaimer here) | ||
| Englishman119 |
I used the Buell Race Belly pan on my XB9 last season. It was pretty pricy and unfortunatly grounds out when you're close to the edge. Its only available from Buell Racer Support via your local H-D/Buell store. Check the racingmotorcycles.com link out. If I were doing just the belly pan again I would buy the lower off the full race fairing and make some brackets to hold it. Its a much closer fit. 119 | ||
| Blake |
You'll need a racing license to purchase a belly pan from Buell Racing. Running a sealed belly pan on a street bike will put more heat into the engine. Not recommended. It will also hold water, so when it rains... slosh. | ||
| Englishman119 |
Quote: "It will also hold water, so when it rains" ....and thats how you get the 1st liquid cooled XB.  | ||
| Shazam |
can't you drill a drain hole in it?  |
