Author |
Message |
1_mike
| Posted on Tuesday, December 09, 2008 - 09:30 am: |
|
Being that I have no idea what the trans. gear ratio is, pulley diameters are... What is the engine RPM at 75mph, (high gear)? Thanks Mike |
Heliconcr
| Posted on Tuesday, December 09, 2008 - 09:41 am: |
|
Good Question.... I would love to go find out but its snowing here... Stupid Chicagoland weather |
Carbonbigfoot
| Posted on Tuesday, December 09, 2008 - 09:46 am: |
|
Gimmie about 15-20 minutes. BRB Rob |
Carbonbigfoot
| Posted on Tuesday, December 09, 2008 - 10:08 am: |
|
I'm indicating right at 4900 RPM @ 75 MPH. What about the R? Rob |
Zac4mac
| Posted on Tuesday, December 09, 2008 - 10:57 am: |
|
Seems like Loretta is at 48-4900 at 80 mph. 4-8" of snow yesterday, I'm bench racing today.... Z |
1_mike
| Posted on Tuesday, December 09, 2008 - 11:57 am: |
|
Great Thanks a lot. Sounds small, but that may have just sealed the deal on buying an 1125CR rather than an R1. After talking to a Buell Engineer Friday night at the Long Beach Bike show and this...it's sounding better all the time. Mike |
Rocketray
| Posted on Tuesday, December 09, 2008 - 05:25 pm: |
|
75 mph in 6th gear = 4500 rpm... checked it about an hour ago. 2008 1125R Ray |
Krassh
| Posted on Tuesday, December 09, 2008 - 07:03 pm: |
|
Gear Ratio's are on Buell.com.
|
Racerxusa
| Posted on Tuesday, December 09, 2008 - 09:58 pm: |
|
76 rear on CR and 70 on 1125R. only difference and the slightly longer swingarm/vbelt. Did I cover it right...? correct me....Im heading out with my CR now for a bike nite...cali cold...lol... (Message edited by racerxusa on December 09, 2008) |
Carbonbigfoot
| Posted on Tuesday, December 09, 2008 - 10:12 pm: |
|
I rember reading in the info from Buell (or maybe somewhere else) that it works out to about an 8% difference in final drive. Boy does the thing snap when you jump on the throttle. Wheeeee! R |
Drdorsey
| Posted on Thursday, December 11, 2008 - 04:48 pm: |
|
"Boy does the thing snap when you jump on the throttle. Wheeeee!" Thats what I'm talking about!
|