| Author | Message | ||
     Easyrider |
Finally our prototype is ready.       http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&aid=1903&cid=5365&s=&a= Now some testing on my S2 and then finally in production. Be patience. | ||
| Oldog |
Nice trinket! | ||
| Buellistic |
Must say a BLACK 20W50 oil container has come a long way !!! | ||
| Cuelbuell |
Aprox. pricing? | ||
| Easyrider |
I hope to have prices next week.. We would like to make 1 set incl. the hoses and clamps. | ||
| Dfbutler |
That is a gorgeous piece. How do you empty/clean it? | ||
| Jayvee |
What is the two-hose routing? Where do they go? | ||
| Sparky |
Did somebody mention a 20W50 container?  | ||
| Jos51700 |
A guess:  and the hose routing is probably 2:1 in, and one out to vent. | ||
| Easyrider |
Jayvee, it's made for positioning straight or lighing down. When you find the place to mount it, choose where you put the hoses. On the picture above it's the standing positioning. The best way to do this, is to us 1 hose for each cylinder head. So you don't build up that much preaasure in your head, then by a 2 in 1 system. And both hoses from the head directly in the catch can. (Message edited by easyrider on October 16, 2008) | ||
| Easyrider |
that's it Jos51700 depending on where on your bike you put it, it's easy to empty and very good to see how much oil and vapor is coming out. | ||
| Skntpig |
WOW nice piece. I want one for my car. I may actually replace my homemade one on my bike too. Please let us know pricing when you get it. One question. Some of the high end catch cans have a stainless screen in them to help condense the vapor. Is there any provision for this now or in the future? This is ART. | ||
| Easyrider |
Skntpig, it's already there. If you look at the picture below, in the top at the middle is the breather. we put 8 bar on the baby and no problem at all. At this picture below you see the inside where the screw is fitted at the bottom. And at this picture: The big nut is for loosing the condense and vapor at the bottem | ||
| Phelan |
Nice! I want one! | ||
| Littlebuggles |
Very nice. | ||
| Easyrider |
The price is set for 91 euro ex 19% VAT. Its more expensive then we thought because all of the small mounting parts that comes with it. 1 x aluminium top 1 x aluminium bottom 2 x oil seal ring 1 x acrylic tube 1 x o-ring 2 x 1/8G messing 0/9mm hose connectors 1 x silencer 1 x breather + bolt 1 x m6/80 RVS bolt 1 x o-ring 45x15 1 x assembling 1 x oil hose 40 inch 2 x rubber mounting bracket |
