G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Bigolebuellfan Posted on Wednesday, September 24, 2008 - 01:34 pm:        Anybody have a set of Blast bars that I could put on my M2? I'm open to alternatives, as well. Just need something a little bit less aggressive. The old man syndrome is setting in...   Fasted Posted on Wednesday, September 24, 2008 - 06:52 pm:        bars make clutch cable and instrument panel problems. get the 1" risers made by precision engineering. inexpensive, look good, and are well made. they have 2" also, but cable and wire length might be a problem http://www.preeng.com/xcart/product.php?productid= 7   Bigolebuellfan Posted on Wednesday, September 24, 2008 - 08:47 pm:        Thx Fast-am I missing something? I could only find the risers for the XBs and 1125...I haven't been able to find any from PE (or anywhere else) for the M2.   Fasted Posted on Wednesday, September 24, 2008 - 10:07 pm:        sorry, i forgot that i actually called on the phone and talked to them for my order. didn't mean to confuse you.....guess sometime i'm kinda slow   Brinnutz Posted on Wednesday, September 24, 2008 - 11:38 pm:        Check American Sport Bike for the 1" risers. Buddy of mine just ordered some from Al.   Fasted Posted on Thursday, September 25, 2008 - 12:42 am:        mine are much better price....they are merely carved chunks of metal. why pay more?   Buell_bert Posted on Friday, September 26, 2008 - 04:21 am:        I used Blast or S3T bars on my 2000 M2 and could not tell the difference. Also the wires, cables, etc. worked just fine. This was last year.   Buell_bert Posted on Friday, September 26, 2008 - 04:35 am:        I did double check an archive and the Blast and S3T are different part #'s but same width and 2" higher. Sorry I sold mine but I'm also looking for another set. Good luck. I may have an after market style part #.   Fasted Posted on Sunday, September 28, 2008 - 08:12 pm:        the following illustrates my point: Posted by Bigolebuellfan on Sunday, September 28, 2008 - 07:09 pm: Okay-I need help. I bought a set of Blast bars for my M2l. From what I've read on here in the KV, they should swap out with no problems. Unfortunately, the instrument cluster is too wide to clear the bars. Other than getting rid of the bars (I do like the riding position), does anybody have any ideas? Is there a different instrument cluster or setup I could use? It doesn't look like there's enough clearance between the edges of the cluster and the gauges to mod the gauge cluster.   Buell_bert Posted on Monday, September 29, 2008 - 01:32 pm:        The bars did work on mine except it had just the speedo not the speedo/tach combo. I hope that helps.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: