| Author |
Message |
    
Zenoah1439
| | Posted on Sunday, September 07, 2008 - 01:42 pm: | 
|
Hey All,
I recently installed a Micron exhaust on my 08 12r and went through the learning mode on the stock ECM. I also have a TFI installed which is supposed to work on the 08, but i'll get to that later.
Currently, the TFI is off, and everything seems to run fine, cept there's a very slight power loss during mild acceleration (non WOT) around 2500 RPM. If the bike is run hard (WOT), it has more power than I know what to do with and the power loss doesn't show up.
My question is this, is there any way to re-program or tweak the 08 EFI yet? I heard rumor that there is a way to get ECM spy to work on the 08's but havent found anything solid on it yet. I doubt the TFI can eliminate my issue below 3k RPM, as it only works from a base RPM up to redline (not to mention that im much less than pleased with the TFI at this point). Any advice would be appreciated. |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through September 10, 2008 »
08 XB12R W/ Micron Exhaust