G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sehudso Posted on Tuesday, August 26, 2008 - 09:40 pm:        I recently purchased and installed the micron exhaust for my xb12ss. I noticed there is a small exhaust leak at the joints. I have the clamps tightened to correct spec and seated them as well as i could. Has anyone else had this issue or have any ideas for preventing this. Thanks, Sean   Tomike00 Posted on Tuesday, August 26, 2008 - 09:49 pm:        Did you use any type of sealant (permatex high temp)? I was told when doing the install (Al at American Sport Bike) to apply the sealant (fill the slots), assemble the exhaust and let the bike sit for 24 hrs so the sealant doesn't get blown out. Worked for me...   The_new_guy Posted on Wednesday, August 27, 2008 - 08:31 pm:        +1 on hi-temp rtv. I never waited 24 hours though and all is fine. Well, actually, I've had a problem with the front exhaust gaskets leaking and the header to muffler joints too but not lately. G

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: