Author |
Message |
Dr_greg
| Posted on Friday, August 22, 2008 - 03:35 pm: |
|
Coming home from a camping trip yesterday, I was just leaving from a rest stop when I noticed the speedometer wasn't moving. "Ah, darned sensor, I'll have to replace it," I thought, and at 51K miles no big deal. But at the NEXT rest stop when I left it started working again, and has remained working. Naturally one thinks of a continuity problem, but has anyone experienced this? |
Bushido
| Posted on Friday, August 22, 2008 - 03:57 pm: |
|
I had a similar problem. I had my speedometer quit several times then come back on during a long trip. I later realized each time it was happening after a quick sharp right hand turn, I think this was causing the tranny fluid to splash up onto the sensor? I removed the speedo sensor and there was a buildup of metal particles on it, the same type of stuff you see on your drain plug. I cleaned the sensor and replaced the trans fluid and have not had a problem since. I think the metal particles sticking to the sensor caused it to malfunction. |
Az_m2
| Posted on Friday, August 22, 2008 - 05:54 pm: |
|
My speedo has quit working 2 or 3 times over the last few years. Always starts working again. |
Froggy
| Posted on Friday, August 22, 2008 - 06:38 pm: |
|
Its your bike trying to stop you from making your Odometer roll over. |
Danger_dave
| Posted on Friday, August 22, 2008 - 07:22 pm: |
|
Mine conks out when it gets real hot in traffic. Works again when it cools slightly. |
Alershka
| Posted on Sunday, August 24, 2008 - 09:12 am: |
|
Mine does not work for the first five minute of riding. I have not noticed it not working during a ride after the initial warm up. |
Barker
| Posted on Sunday, August 24, 2008 - 03:34 pm: |
|
my NineR has went thru 4 speed sensors. the 4th still cuts in/out and then some times it just sweeps back and forth. I gave up on sensors after the 4th. I have the 5th, a brand new one in my garage. It don't even think its worth my time installing it. |
Reepicheep
| Posted on Sunday, August 24, 2008 - 05:31 pm: |
|
PM me if you want a regulator / filter Barker... I think I have enough parts left over to build another. |
|