G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cecil1 Posted on Friday, August 15, 2008 - 11:13 am:        I will have to replace the rear tire on my S-1 before I can get it inspected. I checked online for a new Dunlop 207 but can't seem to find any. Can I use the Dunlop Qualifier on the rear and still run the 207 on the front? Should I go with the stock 170 or go to a 180 or 190? I will replace the front this winter but can't swing getting both now.   Djkaplan Posted on Friday, August 15, 2008 - 01:17 pm:        You can mix tires, but you have to be careful at limits because they will respond differently than a matched set. I ran a 207 rear with a 205 front for a while and didn't notice anything too squirrly. There is no benfit mounting a tire on a wheel too narrow for it. Run the tire size recommended by the tire manufacturer for the rim width you have... if you have the three spoke cast wheels, it's 5" wide, if you have PM wheels, it's 5 1/2" wide. I believe Dunlop recommends a 170/60 for a 5" wide wheel, and 180/55 for a 5 1/2" wide wheel.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: