Author |
Message |
Spiderman
| Posted on Thursday, July 24, 2008 - 01:36 pm: |
|
I need the two inner casses, the two halfs that hold the crank and tranny. Do not need a matching VIN, or BOS can be race use only. Just need em to get MJ back up and running. Thanks! Spidey |
Lake_bueller
| Posted on Thursday, July 24, 2008 - 06:00 pm: |
|
Just need em to get MJ back up and running. Again?!?!?! I wish I could help. Maybe it's time to retire MJ (sorry, but somebody has to say it) |
Puddlepirate
| Posted on Thursday, July 24, 2008 - 06:04 pm: |
|
There's a set on ebay right now. http://cgi.ebay.com/ebaymotors/BUELL-TUBE-FRAME-RA CE-ENGINE-CASES-NEW_W0QQitemZ170243390166QQihZ007Q QcategoryZ35560QQssPageNameZWDVWQQrdZ1QQcmdZViewIt em |
Phelan
| Posted on Thursday, July 24, 2008 - 06:16 pm: |
|
If the cases are the same on an '03 sportster, I have a set that I'll sell you cheap. They will need to be split and cleaned; drive gear shattered, but they are usable. |
Aronxs400
| Posted on Friday, July 25, 2008 - 12:23 am: |
|
there is a set for sale on the ahdra web site |
Bluzm2
| Posted on Friday, July 25, 2008 - 12:19 pm: |
|
I believe the 03 Sportster cases are the same. They didn't make the big change until 04. |
Rick_a
| Posted on Friday, July 25, 2008 - 02:20 pm: |
|
The Sporty cases have smaller rear mount holes, and need to be end-milled for the front tie-bar mount. |
Puddlepirate
| Posted on Friday, July 25, 2008 - 06:14 pm: |
|
Rick_a, are the rear mount holes in the same spots, or would the holes have to me moved as well as enlarged? |
Rick_a
| Posted on Saturday, July 26, 2008 - 09:28 am: |
|
They are in the same spots, but the Buell uses 1/2" bolts while the sporty mounts with 3/8". I believe only the top two holes need enlarging as the lower two use a bushing insert. |
|