G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cyclonemduece Posted on Saturday, May 31, 2008 - 12:42 pm:        I searched it and still am unclear of the process, can some give me a good link? I am assuming that i pull out the mounting block swingarm assembly and put the isolators in the frame provisions and the slide the mounting block swingarm assembly in between the installed isolators? Is there only supposed to be locating pins on the right side of the frame? THANKS BLAKE   Natexlh1000 Posted on Saturday, May 31, 2008 - 01:33 pm:        Those little roll-pins should be on both sides. Also, you have to make sure that they aren't too long to allow the backing plate to seat perfectly. it's really simple to do on an X1...(took me 8 hours to do, will take 1:45 next time). Be patient, there's always a trick. Think of it as a puzzle. Remember: SOMEONE in Troy put the damn thing together in the first place, right?   Jos51700 Posted on Sunday, June 01, 2008 - 10:44 am:        And, someone in East Troy did it fairly quickly....   Cyclonemduece Posted on Sunday, June 01, 2008 - 09:43 pm:        I AM AN IDIOT... i got it put in place and just remembered the belt needs to be in there. ahhhhhhhhhhh   Jos51700 Posted on Monday, June 02, 2008 - 09:04 am:        "i got it put in place and just remembered the belt needs to be in there. ahhhhhhhhhhh" I've done it. Everyone does it. You're not an idiot, yet. You're just forgetful. If you leave the belt out and can't figure out why it won't go, THEN you're an idiot.   Littlebuggles Posted on Tuesday, June 03, 2008 - 02:09 am:        Blake, that's too bad, when I did mine I had help from another fellow from here (Thanks again Dbird) so while I would have forgotten, he was there to save my tail. Have you got pics of your bike on here anywhere? Sounds like what I've pictured doing with mine, still trying to decide on the headlight though...   Cyclonemduece Posted on Tuesday, June 03, 2008 - 07:16 pm:        no pics i will get some up soon

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: