| Author |
Message |
    
Darth_buell
| | Posted on Wednesday, April 09, 2008 - 10:38 am: | 
|
I think I heard that you could hook up the ECM Spy to A palm pilot.... Is this right or was I mistaken. If so can you hook it up to a Palm Treo... The Palm Pilot Cell phone that runs windows.... |
P47b
| | Posted on Wednesday, April 09, 2008 - 12:13 pm: |
|
Yes you can hook it up to a Palm. It gives you a listing on the ones you can use. This is my next project after I get the cable hooked up. |
Ratyson
| | Posted on Wednesday, April 09, 2008 - 02:12 pm: |
|
Also, for the palm, you would need to build a different cable.
You can check the ecmspy website for the parts for this. |
P47b
| | Posted on Sunday, April 13, 2008 - 11:15 pm: |
|
Ok I set the TPS on my bike last night. Works great. Till this morning. Start the bike and it struggles to stay going. No problem reset the TPS to a higher setting. Thats when I hear a pop when turning the flex screw for the TPS.
Any one have an extra TPS screw? |
Cataract2
| | Posted on Sunday, April 13, 2008 - 11:58 pm: |
|
Was reading on the software about a serial cable being able to use also. Anyone know? |
Id073897
| | Posted on Monday, April 14, 2008 - 02:56 am: |
|
Was reading on the software about a serial cable being able to use also. Anyone know?
No problem at all. You need a serial (modem-) cable an a RS232-to-TTL converter. You will find masses of these offered at common auction platforms.
The USB cable however is much easier to handle.
Regards,
Gunter |
Randomchaos
| | Posted on Monday, April 14, 2008 - 09:02 am: |
|
"Any one have an extra TPS screw?"
I didnt think the TPS had an adjustment screw, thought all adjustments were done through software. Are you talking about the Idle Adjuster cable located between the right side scoop and the motor? |
Blake
| | Posted on Monday, April 14, 2008 - 02:30 pm: |
|
What do you mean by "reset the TPS to a higher setting"?  |
P47b
| | Posted on Monday, April 14, 2008 - 10:41 pm: |
|
Sorry I was frustrated when I wrote that. Yes it is an Idle Adjuster Cable. The Cable has no clearance at the end of it and the ignition block. 1/4 turn more than needed and it froze up. Would not go in or out.
I silver soldered it back on to the bolt. The crimp was not that great on it.
All is well. |
Roro
| | Posted on Thursday, April 17, 2008 - 04:45 pm: |
|
I tried this setup and everything worked like a charm. I had zero problems resetting the TPS. I used the laptop setup with USB cable. Everyone should get this. |
Ferris_von_bueller
| | Posted on Thursday, April 17, 2008 - 06:44 pm: |
|
Anyone else have an 05 race ecm? I noticed there is no support for that year |
Mesafirebolt
| | Posted on Wednesday, April 23, 2008 - 03:36 pm: |
|
Yeah, I have an 05 Race ECM. I have Kept it stock, I modded my original stock one around too though, Its fun to tinker! |
Ratyson
| | Posted on Thursday, April 24, 2008 - 09:28 am: |
|
Anyone else have an 05 race ecm? I noticed there is no support for that year
I have an 05 race ecm in my CityX, and ecmspy has no problems with it. I have the original version of ecmspy.} |
