G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cixyx_pilot Posted on Saturday, October 20, 2007 - 12:15 pm:        06 City X , How much slack should be in the primary chain???   Dentguy Posted on Saturday, October 20, 2007 - 12:49 pm:        I would think it is the same as a XB12 which is 3/8"-1/2" cold and 1/4"-3/8" hot(normal running temp.). Make sure you check it in multiple places to find the tightest spot. Mine definitely had loose and tight spots. Specifications are for the tightest spots. Hope this helps.   4cammer Posted on Saturday, October 20, 2007 - 01:09 pm:        If you do not have one already make a point of getting the factory shop manual. Makes great reading room fodder.... The printed one- not the stolen crappy PDF'd one on ebay. Best 35.00 or so you may spend. The parts manual is a must as well. Makes getting parts from your local chrome emporium much easier.   Tank_bueller Posted on Saturday, October 20, 2007 - 02:13 pm:        There is a wide opinion that the factory specs are too tight. The consensus seems to be more like 5/8" to 3/4" cold. I adjusted mine to factory spec, and got the dreaded primary "whine". Loosened it up and all was well once again.   Cixyx_pilot Posted on Saturday, October 20, 2007 - 02:52 pm:        Thanks for the help everyone. It's good to have Badweb people to count on.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: