G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cjburr Posted on Saturday, October 11, 2008 - 07:19 pm:        Going over the old 98 S1W it was time to replace the front rotor.....as has been posted several times they are $300 or more. I happened to have a rotor I got when I bought the S1W front end for my Sportster so I decided to use it. After installing it I found that this rotor didn't have the screws and washers holding the rotor to the carrier, instead the brake drive pins are held on with circlips....the screws and spring washers will not fit. Is this a later rotor with improvements and everything is kosher or am I missing something ??   S2pengy Posted on Sunday, October 12, 2008 - 06:20 am:        http://www.badweatherbikers.com/buell/messages/384 2/3842.html scroll down to the service bullentins B-013 September 22, 1997 SAFETY RECALL CODE 0807 - 1997/1998 FRONT BRAKE ROTOR DRIVE PINS   Cjburr Posted on Sunday, October 12, 2008 - 08:02 am:        Excellent, thank you very much.....may have saved me from severe road rash or worse. It seems my bike was already updated so I will see if I can purchase the drive pin kit from Buell.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: