G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cyclonemduece Posted on Monday, September 10, 2007 - 09:48 pm:        can i get someone to give me a diameter dimension of a Penske rear shock reservoir please?   Ratbuell Posted on Monday, September 10, 2007 - 10:31 pm:        Measured on my crappy pocket 1/8" measuring tape, it comes out just shy of 1-7/8". Maybe 1-13/16"? (ish)   Nocompromise Posted on Monday, September 10, 2007 - 10:32 pm:        Blake, sorry I totally forgot I was going to measure that for you! I just ran out to the garage - 2 inches exactly. Let me know if you order those mounts. I'm debating whether to order them or stick with the hose clamps that came with the Penske shock. Show us some pictures once you get your shock mounted!   Nocompromise Posted on Monday, September 10, 2007 - 10:35 pm:        LOL Rat, we posted at almost the same time and came up with 2 different numbers! I used a tape measure and checked across the bottom of the reservoir where there is less obstruction. If I can dig up a ruler I will go get a "second opinion".   Ratbuell Posted on Monday, September 10, 2007 - 10:51 pm:        Yah, I was across the bottom too. What version shock do you have? Mine's the 21-or-whatever position adjust. According to the manual...8660 series compression adjuster. Maybe we have different series cans?   Nocompromise Posted on Monday, September 10, 2007 - 11:46 pm:        Actually yes, I have the mid-range Penske. It doesn't have both low and high speed adjustment like their top-of-the-line shock does, but it is a step above the base model. I'd have to find the receipt to find the exact model number. That makes me a little more leary about buying that mounting bracket if Penske reservoirs are actually different diameters. I'll try to find a ruler to double check my measurement.   Djkaplan Posted on Tuesday, September 11, 2007 - 08:49 am:        My 8900 (the mid-range damper) measures about 1 7/8" give or take a 16th. I used the stock reservoir clamp on my Penske shock and it fit perfectly.   Ratbuell Posted on Tuesday, September 11, 2007 - 10:11 am:        Ditto on the stock res clamp and super-sexy hose clamp. The stocker is rubber so it'll "mold" itself within 1/8" or so.   Cyclonemduece Posted on Tuesday, September 11, 2007 - 09:56 pm:        anyone have a caliper to measure it exact?   Nocompromise Posted on Tuesday, September 11, 2007 - 10:43 pm:        I do have a caliper. I'll measure it after dinner. Lol, here I am trying to find a ruler and I have a caliper!   Nocompromise Posted on Wednesday, September 12, 2007 - 12:58 am:        Um, you won't believe this but somehow my caliper was misplaced. I measured it again carefully not using the END of the tape measure - using the middle - and I came up with 1-15/16". It could be 1-7/8, but it was hard for me to tell. Blake, I can try and dig around for my caliper tomorrow, but since it's ALWAYS in my toolbox I really haven't the foggiest where it could've gone. If I find it I'll measure and post right away.   Cyclonemduece Posted on Wednesday, September 12, 2007 - 08:16 pm:        cool thank you..

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: