G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Silversnc Posted on Sunday, April 19, 2009 - 05:19 pm:        04 Firebolt XB12r I just changed the oil after about 2500 miles and after refilling the oil i started her up and there is a loud knocking sound coming from the clutch case, not sure if it is just becuase i completely drained it before refilling and so it just needs the oil to circulate or what, i let it run for about 30 seconds before i just shut her off, dont want to ruin anything just yet... please let me know if there is anything i should check.   Silversnc Posted on Sunday, April 19, 2009 - 05:58 pm:        i think i figure it out, i accidentally moved the chain tensioner bolt, any suggestions for setting it up?   Silversnc Posted on Sunday, April 19, 2009 - 06:45 pm:        alright, its good to go, just tightened to specs or as close as i could get by taking off the chain viewer window on the side and testing. Runs as quite as a mouse now.. by buell standards   Bikerjim99 Posted on Sunday, April 19, 2009 - 07:55 pm:        Be sure that you have sufficient slack in your chain. Slightly too loose is better than slightly too tight.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: