| Author |
Message |
    
Nfhemp
| | Posted on Saturday, June 09, 2007 - 11:16 pm: | 
|
I have a little problem of my engine not firing. I have the ignition switch in the on position and when I turn the key on my engine light blinks really fast. It does not come on for the four seconds then go out. When I hit the start button the engine cranks, but does not turn over. I checked both cylinders and I do not get a spark at either plug. I checked the ignition switch and the ignition coil and they are fine. I do not have a breakout box, so I can't check the cam position sensor or the ECM. Does anyone have a clue? |
Nfhemp
| | Posted on Wednesday, June 13, 2007 - 06:55 pm: |
|
For all of you who might have this issue later on I have found the answer. There are two relays next to the fuse box that can go bad. They are $5 a piece and very easy to change. So if your bikes engine light is blinking really fast when you first turn the bike on and the engine turns but does not fire check your relays. |
Dave
| | Posted on Saturday, June 16, 2007 - 11:12 am: |
|
Good info
DAve |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through August 08, 2007 »
2001 S3T That Will Not Start