G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Garlic_sauce Posted on Saturday, April 11, 2009 - 09:31 pm:        Is this the stuff? http://parts.motorcycle-superstore.com/1/1/16453-q uiet-fiberglass-repacking-kit-vance-hines.html Do I need more than one? Thanks   Garlic_sauce Posted on Saturday, April 11, 2009 - 10:07 pm:        Also, Is this the "quiet core" EZ mentioned or is that something different like the one for the jardine? If not I would like to know where to get one because I can't find anything else. Thanks   Gearheaderiko Posted on Saturday, April 11, 2009 - 10:36 pm:        Thats the stuff. I dont know if you'll need more than one. When I did my White Brothers, one (of a different make-FMF) was more than enough to pack it tight. I'd get two (but thats me). Loosly packed will burn out quickly and either way you'll have to repack again eventually. A "Quiet Core" is a Jardine item and refers to an insert they make for the Jardine only.   Gearheaderiko Posted on Saturday, April 11, 2009 - 10:40 pm:        PS This thread moved to the KV section under engine/exhaust/V & H. http://www.badweatherbikers.com/buell/messages/201 64/377480.html?1239243049   Garlic_sauce Posted on Saturday, April 11, 2009 - 11:10 pm:        Awesome, thanks.   Garlic_sauce Posted on Sunday, August 02, 2009 - 01:40 pm:        Just for reference, the nuts that hold the endcap on the V&H can(that usually strip quite easily) are 10/32 thread.   Garlic_sauce Posted on Sunday, August 02, 2009 - 03:01 pm:        Well I can't get the V&H can off the header while the header is bolted to the bike. I have a new exhaust gasket and studs anyway so I decided to take off the whole system, The nuts and studs are really rusted I've been spraying them with PB blaster and one came off pretty easy although I think the stud unscrewed a bit. The other nut will not come off, I figure I'll just keep spraying it and it will eventually give. Any tips?   Garlic_sauce Posted on Monday, August 03, 2009 - 07:28 am:        Well I let the PB soak in over night and I got the header off. Thing is the stud came out with the nut, no big deal though I have a new stud and I'll replace the nuts with stainless steel ones. Also, whoever installed this exhaust system didn't use a F'n gasket. I have a new one that I got from american sportbike though. To get the stud in I think I'll just double nut it and screw it in that way. (Message edited by garlic_sauce on August 03, 2009)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: