G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Roro Posted on Tuesday, April 17, 2007 - 11:38 pm:        Hello all, I've been a lurker for a while now. My question is, I installed a Hyper-Lite Dual Function running/brake LED kit per the instructions but am not getting any feedback from the lights. The instructions were pretty simple-stupid (or so I thought) and did not mention having to install any sort of relay. Should I have done that? Any ideas on what I should do next? Could it have been a faulty kit? Thanks in advance for any help.   Blake Posted on Wednesday, April 18, 2007 - 06:27 pm:        Do they have a web site and FAQ page, or a contact # or email? LED's shouldn't require a relay, they are low voltage enough, heck my LED flashlight doesn't have any relays. Check grounding and fuses/breakers?   Jetjock Posted on Saturday, April 21, 2007 - 08:23 am:        I put the 16 light blinker/brake/running light version on my FLHTCI by splicing into the equivalent wires on the bike (no relays). Biggest problem was finding good routing for all the wires & placing the lights as high as practical on the tourpack (put them behind/under the pax seatback). Works great & is much harder to miss/ignore even by the jacked up 4x4s. The guy who makes the hyperlites is very helpful -- call him.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: